为了能够让路沿石塑料模具有着更好的效果，在生产路沿石塑料模具的时候会在水泥的里面加入一些沙子，泥土之类的材料

In order to improve the effectiveness of roadside stone plastic molds, materials such as sand and soil are added to the cement during the production of roadside stone plastic molds

Then pour the mixture into the mixer and add clean water to start mixing. Then pour the mixed cement into the roadside stone mold to start production

因为模具的型号比较的小，所以他的制作时间非常的短，水泥的好坏会直接影响到生产出来的预制块

Because the model of the mold is relatively small, its production time is very short, and the quality of the cement will directly affect the prefabricated blocks produced

如果水泥是劣质的话，存在大量的杂质，制作出来的条石硬度不够的话就不能够正常使用，也会给路沿石模具造成磨损

If the cement is of poor quality and contains a large amount of impurities, the produced stone strips with insufficient hardness will not be able to be used normally and will also cause wear and tear to the roadside stone molds

因为路沿石塑料模具是模具的一种，所以如果出现破损是不能够脑补的，只能够更换新的模具进行生产加工，然后将旧模具送去处理厂。

Because the roadside stone plastic mold is a type of mold, if there is damage, it cannot be repaired. Only a new mold can be replaced for production and processing, and the old mold can be sent to a processing plant.